Tractor repairs
Enquire about starting, running, electrical and mechanical faults. Inspection helps identify the affected system and establish the repair scope.
Garden and agricultural machinery repairs in Bedfordshire
From a mower that will not start to an agricultural machine with a hydraulic or electrical fault, RJW helps identify the problem and discuss the practical next step. Explore the guides below for garden machinery, or read about the repairs and maintenance available for small and medium agricultural equipment.
Based near Biggleswade, Rhys welcomes enquiries from Sandy and surrounding areas. Send the machine details and symptoms before booking, and confirm visit or drop-off arrangements before travelling.
Find help for
your machine.
Each guide explains the problems commonly reported, which parts may need checking and what information to share when arranging an assessment.
01
Walk-behind mowers
Starting faults, stalling and uneven cutting, alongside routine mower servicing.
View lawn mower repairs ↗
02
Ride-on mowers
Assessment of engine, cutting-deck and drive problems affecting larger mowing equipment.
Explore ride-on mower repairs ↗
03
Strimmers & brushcutters
Fault finding for hard starting, power loss and cutting heads that will not feed or rotate.
View strimmer repairs ↗
04
Hedge trimmers
Help with snagging blades, poor cutting, starting difficulties and loss of blade movement.
Explore hedge trimmer repairs ↗
05
Chainsaws
Diagnosis of starting, cutting and chain-oiling faults before repair work is recommended.
View chainsaw repairs ↗
06
Small engines
Carburettor cleaning and engine assessment for uneven running, smoke and loss of power.
Explore engine repairs ↗
07
Gearboxes & drive systems
Investigation of slipping, unreliable movement, leaks and unfamiliar transmission noise.
View drive-system repairs ↗
08
Blades & cutting tools
Assessment of worn or damaged cutting edges to establish whether sharpening is suitable.
Explore blade assessment ↗
SMALL & MEDIUM AGRICULTURAL MACHINERY
Repairs and maintenance for agricultural equipment
Rhys also works on suitable small and medium agricultural machinery. Share the make, model, operating hours and symptoms so the proposed assessment and practical arrangements can be discussed.
Electrical diagnostics
Describe warning lights, intermittent faults, starting problems or recent electrical work. Diagnostic compatibility depends on the machine and model.
Hydraulics and hoses
Explain which hydraulic function is affected, whether fluid is leaking and when performance changes. Stop using equipment with an active leak and discuss an assessment.
Implements and attachments
Send the implement type and identification details. Describe any damaged components, unusual noise or functions that no longer operate as expected.
Routine and seasonal maintenance
Discuss operating hours, previous servicing and upcoming work so maintenance can be considered around the equipment's use.
Carburettor cleaning
Cleaning is available for suitable carburettor-equipped machines when contamination or restrictions are responsible for the fault. Our small-engine repair guide explains why starting and running problems need assessing before choosing the repair.
REPAIR OR REPLACE?
Good advice starts
Good advice starts
with a closer look.
A familiar symptom can have several causes. Assessment helps distinguish a straightforward adjustment or repair from more involved work.
Machine condition, parts availability and the likely cost all influence the options. Rhys discusses the findings and proposed work so you can decide whether to proceed.
YOUR QUESTIONS, ANSWERED
Machinery repair FAQs
My mower will not start after storage. Does it need replacing? +
Not necessarily. Fuel deterioration, carburettor restrictions or ignition faults can produce similar symptoms. Share the mower model and how long it has been stored to discuss an assessment.
Ask about a mower starting fault ↗The engine runs, but my ride-on will not move. What could be wrong? +
A belt, control linkage or transmission fault may affect movement. These need different checks. Our gearbox and drive repair guide explains the symptoms that can help describe the problem.
Request a ride-on drive assessment ↗My strimmer starts but stops when I accelerate. Can it be repaired? +
Fuel delivery, carburettor condition or an air leak may be involved. Diagnosis helps establish whether cleaning, adjustment or replacement parts are appropriate. Tell us when it stops and whether the fault followed storage.
Ask about strimmer power loss ↗My mower cuts badly or vibrates. Will sharpening solve it? +
A worn edge can affect cutting, but damage, imbalance or mounting problems may also be involved. Stop using a mower with unusual vibration. Assessment helps determine whether sharpening or another repair is needed.
Ask about blade condition ↗My engine is smoking or making a new knocking noise. Can I keep using it? +
Stop the engine and avoid further use until it has been assessed. Oil issues, wear or internal damage may be involved. Describe when the noise or smoke began and any recent change in performance.
Request an engine assessment ↗I am not sure which service I need. What should I book? +
Start by sending the machine make, model, symptoms and your postcode. Rhys can discuss a suitable assessment without asking you to identify the faulty component yourself.
Describe your machine problem ↗Do you work on small and medium agricultural machinery? +
Yes. Rhys offers repairs, diagnostics and maintenance for suitable equipment, including tractor repairs, hydraulic work, electrical faults and implements. Send the machine details so suitability and arrangements can be confirmed.
Discuss agricultural machinery repairs ↗Can you clean a carburettor on agricultural machinery? +
Carburettor cleaning is available for suitable machines equipped with a carburettor. Hard starting and uneven running can have other causes, so share the make, model and symptoms before arranging an assessment.
Ask about carburettor cleaning ↗
LET’S GET IT SORTED
Tell us what’s
Discuss your repair ↗
Tell us what’s
not working.
Send the make, model and a description of the fault to discuss assessment and repair arrangements.